PISTON SEAL JSDAS-5 PIECES

Short Description:

Piston Seals JSDAS

Technical Date:

Temperature: -30 ~+ 100 °C

Pressure: 30 MPa (Max.)

Speed: 0.5 m/s (eciprocating)

Fluids: Mineral oil-based hydraulic fluids,Biologil dEgradabl oil and water etc.

Material: Elastomer: NBR 70 shore A

Back-up Ring: Poyster elastomer

Guide Ring POM

 

AVAILABILITY:   Stock statusIn Stock


  • Min.Order Quantity: 1 Set or 1 Bag
  • Supply Ability: 1000 Sets per Week
  • Delivery Time: 5-7 days for samll order
  • Product Detail

    About Us

    Product Tags

     

    Advantages:

    –Closed grooes and intgral piston (the seal comprising and elastomeric profile seal ring, two back-up rings and two wear rings). reduced the length of piston, reduced maching costs.

    -Good extrusion resistance.

    -The grooves are simple and easy to install

    -Good sealing effect.

    -Low product cost.

    ITEM D d1 H
    JSDAS 20 11 17.7
    JSDAS 25 15 20
    JSDAS 25 15 29.1
    JSDAS 25 16 17.7
    JSDAS 28 19 17.7
    JSDAS 30 21 17.7
    JSDAS 32 22 20.7
    JSDAS 32 22 29.1
    JSDAS 32 24 21.9
    JSDAS 35 25 20.7
    JSDAS 35 25 29.1
    JSDAS 40 24 31.1
    JSDAS 40 26 20.7
    JSDAS 40 30 29.1
    JSDAS 40 30 20.5
    JSDAS 42 28 20.7
    JSDAS 45 29 31.1
    JSDAS 45 31 20.7
    JSDAS 45 35 29.1
    JSDAS 50 34 31.1
    JSDAS 50 34 26.7
    JSDAS 50 38 28.9
    JSDAS 55 39 31.1
    JSDAS 55 39 26.7
    JSDAS 56 40 26.7
    JSDAS 60 44 26.7
    JSDAS 60 44 31.1
    JSDAS 60 48 28.9
    JSDAS 63 47 26.7
    JSDAS 63 47 31.1
    JSDAS 63 47 32.1
    JSDAS 63 51 28.9
    JSDAS 65 50 31.1
    JSDAS 65 49 26.7
    JSDAS 65 50 31.1
    JSDAS 70 50 35.1
    JSDAS 70 54 26.7
    JSDAS 70 58 28.9
    JSDAS 75 55 35.1
    JSDAS 75 59 26.7
    JSDAS 80 60 35.1
    JSDAS 80 62 29.7
    JSDAS 80 66 32.9
    JSDAS 85 65 35.1
    JSDAS 90 70 35.1
    JSDAS 90 72 29.7
    JSDAS 90 76 32.9
    JSDAS 95 75 35.1
    JSDAS 100 75 35.1
    JSDAS 100 80 38.1
    JSDAS 100 82 29.7
    JSDAS 100 86 32.9
    JSDAS 105 80 35.1
    JSDAS 110 85 35.1
    JSDAS 110 92 29.7
    JSDAS 110 96 32.9
    JSDAS 115 90 35.1
    JSDAS 115 97 29.7
    JSDAS 120 95 35.1
    JSDAS 120 106 32.9
    JSDAS 125 100 38.1
    JSDAS 125 103 36.7
    JSDAS 125 108 40.9
    JSDAS 130 105 44.4
    JSDAS 130 105 38.1
    JSDAS 135 110 44.4
    JSDAS 135 110 38.1
    JSDAS 140 115 44.4
    JSDAS 140 115 38.1
    JSDAS 140 118 36.7
    JSDAS 140 123 40.9
    JSDAS 145 120 44.4
    JSDAS 145 120 38.1
    JSDAS 150 125 44.4
    JSDAS 150 125 38.1
    JSDAS 150 128 36.7
    JSDAS 150 133 40.9
    JSDAS 155 130 44.4
    JSDAS 160 130 38.1
    JSDAS 160 135 44.4
    JSDAS 160 138 36.7
    JSDAS 160 143 40.9
    JSDAS 165 140 44.4
    JSDAS 170 145 50.8
    JSDAS 175 150 50.8
    JSDAS 180 150 48.1
    JSDAS 180 155 50.8
    JSDAS 185 160 50.8
    JSDAS 190 165 50.8
    JSDAS 195 170 50.8
    JSDAS 200 175 50.8
    JSDAS 210 185 50.8
    JSDAS 220 190 48.1
    JSDAS 220 195 50.8
    JSDAS 230 205 50.8
    JSDAS 240 215 50.8
    JSDAS 250 220 48.1
    JSDAS 250 225 50.8
    JSDAS 254 224 53.8
    JSDAS 260 235 60.5
    JSDAS 275 250 44.7
    JSDAS 280 250 54.4
    JSDAS 280 250 56.3
    JSDAS 280 255 50.8
    JSDAS 300 275 44.7
    JSDAS 320 290 54.5
    JSDAS 320 290 61.4
    JSDAS 320 295 50.8
    JSDAS 360 335 50.8
    JSDAS 400 375 50.8

  • Previous:
  • Next:

  • What are JSPSEAL Hydraulic Seal made from?

    Hydraulic seals can be made from a variety of materials such as polyurethane, rubber or PTFE ect. The type of material is determined by the specific operating conditions or limits due to seal type, pressure, fluid chemical compatibility, speed, surface roguhness, Radial load, Hydraulic shock, or temperature.

     

    Material Characteristics

    Material Temperature Media Velocity Pressure(MPa)
    NBR -45°C to +140°C Mineral oil baed, hydraulic fluids,biological degradable oils water 0.5 25
    FKM -20°C to +200°C Mineral oil baed 0.5 25
    PU -30°C to +100°C Mineral oil baed, hydraulic fluids 0.8 35
    TPE -40°C to +110°C Mineral oil baed 0.8
    POM -45°C to +120°C Mineral oil baed 0.8
    PA -45°C to +120°C Mineral oil baed 1.0
    PTFE -55°C to +200°C Mineral oil baed,biological degradable oils water 15 40
    PHENOLIC RESIN COTTON FABRIC -50°C to +120°C Mineral oil baed,biological degradable oils water 1.0

     JSPSEAL aims at win-win situation with China customer.  We’re able to improve customer competitiveness with our product and service.

     

    Why Choose JSPSEAL Seal part?

     

    We have been selling in the aftermarket for nearly 20 years, we know more about what kind of seal the machine needs under bad work conditions. And precision molds ensure product size. Original imported raw materials ensure the mechanical properties of the products.

     

    JSPSEAL products have been exported for more than 10 years, and our extensive export experience can help you solve various transportation problems.we can ensure fast and efficient lead times across all JSPSEAL Parts.  

  • Related Products