2017 China New Design Oil Seal Making Machine - PTFE PISTON SEAL JSPGO – JSPSEAL Detail:
Advantages:
-No stick-slip effect when starting for smooth operation
-Low friction and high wear resistance ensure long service life.
-Min. Static and dynamic friction coefficient ensure high speed
-Simple groove design, one-piece piston possible.
-Suitable for most hydraulic fluids
-Available for all cylinder diameter up to 500 mm
| ITEM | OD | H |
| SPGO | 30 | 3.2 |
| SPGO | 35 | 3.2 |
| SPGO | 40 | 3.2 |
| SPGO | 45 | 3.2 |
| SPGO | 28 | 4.2 |
| SPGO | 30 | 4.2 |
| SPGO | 32 | 4.2 |
| SPGO | 35 | 4.2 |
| SPGO | 40 | 4.2 |
| SPGO | 45 | 4.2 |
| SPGO | 50 | 4.2 |
| SPGO | 55 | 4.2 |
| SPGO | 60 | 4.2 |
| SPGO | 63 | 4.2 |
| SPGO | 65 | 4.2 |
| SPGO | 70 | 4.2 |
| SPGO | 75 | 4.2 |
| SPGO | 80 | 4.2 |
| SPGO | 40 | 6.3 |
| SPGO | 45 | 6.3 |
| SPGO | 50 | 6.3 |
| SPGO | 55 | 6.3 |
| SPGO | 60 | 6.3 |
| SPGO | 63 | 6.3 |
| SPGO | 65 | 6.3 |
| SPGO | 70 | 6.3 |
| SPGO | 75 | 6.3 |
| SPGO | 80 | 6.3 |
| SPGO | 85 | 6.3 |
| SPGO | 90 | 6.3 |
| SPGO | 95 | 6.3 |
| SPGO | 100 | 6.3 |
| SPGO | 105 | 6.3 |
| SPGO | 110 | 6.3 |
| SPGO | 115 | 6.3 |
| SPGO | 120 | 6.3 |
| SPGO | 125 | 6.3 |
| SPGO | 130 | 6.3 |
| SPGO | 135 | 6.3 |
| SPGO | 140 | 6.3 |
| SPGO | 150 | 6.3 |
| SPGO | 160 | 6.3 |
| SPGO | 180 | 6.3 |
| SPGO | 80 | 8.1 |
| SPGO | 85 | 8.1 |
| SPGO | 90 | 8.1 |
| SPGO | 95 | 8.1 |
| SPGO | 100 | 8.1 |
| SPGO | 105 | 8.1 |
| SPGO | 110 | 8.1 |
| SPGO | 115 | 8.1 |
| SPGO | 120 | 8.1 |
| SPGO | 125 | 8.1 |
| SPGO | 130 | 8.1 |
| SPGO | 135 | 8.1 |
| SPGO | 140 | 8.1 |
| SPGO | 145 | 8.1 |
| SPGO | 150 | 8.1 |
| SPGO | 155 | 8.1 |
| SPGO | 160 | 8.1 |
| SPGO | 165 | 8.1 |
| SPGO | 170 | 8.1 |
| SPGO | 175 | 8.1 |
| SPGO | 180 | 8.1 |
| SPGO | 185 | 8.1 |
| SPGO | 190 | 8.1 |
| SPGO | 200 | 8.1 |
| SPGO | 210 | 8.1 |
| SPGO | 220 | 8.1 |
| SPGO | 225 | 8.1 |
| SPGO | 230 | 8.1 |
| SPGO | 240 | 8.1 |
| SPGO | 250 | 8.1 |
| SPGO | 260 | 8.1 |
| SPGO | 270 | 8.1 |
| SPGO | 280 | 8.1 |
| SPGO | 290 | 8.1 |
| SPGO | 300 | 8.1 |
| SPGO | 310 | 8.1 |
| SPGO | 315 | 8.1 |
| SPGO | 320 | 8.1 |
| SPGO | 330 | 8.1 |
| SPGO | 340 | 8.1 |
| SPGO | 350 | 8.1 |
| SPGO | 360 | 8.1 |
| SPGO | 140 | 9.7 |
| SPGO | 150 | 9.7 |
| SPGO | 160 | 9.7 |
| SPGO | 170 | 9.7 |
| SPGO | 180 | 9.7 |
| SPGO | 100 | 7.2 |
| SPGO | 110 | 7.2 |
| SPGO | 120 | 7.2 |
| SPGO | 130 | 7.2 |
Product detail pictures:
Related Product Guide:
Low-input and multiplexed microfluidic assay reveals epigenomic variation across cerebellum and prefrontal cortex | Excavator Seal
Structural and Biochemical Analyses of Swine Major Histocompatibility Complex Class I Complexes and Prediction of the Epitope Map of Important Influenza A Virus Strains | Shaft Seal Wheel Bearing Skf Vks 6428
We've been convinced that with joint efforts, the enterprise between us will bring us mutual benefits. We are able to assure you product or service quality and aggressive cost for 2017 China New Design Oil Seal Making Machine - PTFE PISTON SEAL JSPGO – JSPSEAL, The product will supply to all over the world, such as: Lesotho , Peru , Sri Lanka , We have customers from more than 20 countries and our reputation has been recognized by our esteemed customers. Never-ending improvement and striving for 0% deficiency are our two main quality policies. Should you need anything, don't hesitate to contact us.
What are JSPSEAL Hydraulic Seal made from?
Hydraulic seals can be made from a variety of materials such as polyurethane, rubber or PTFE ect. The type of material is determined by the specific operating conditions or limits due to seal type, pressure, fluid chemical compatibility, speed, surface roguhness, Radial load, Hydraulic shock, or temperature.
Material Characteristics
| Material | Temperature | Media | Velocity | Pressure(MPa) |
| NBR | -45°C to +140°C | Mineral oil baed, hydraulic fluids,biological degradable oils water | 0.5 | 25 |
| FKM | -20°C to +200°C | Mineral oil baed | 0.5 | 25 |
| PU | -30°C to +100°C | Mineral oil baed, hydraulic fluids | 0.8 | 35 |
| TPE | -40°C to +110°C | Mineral oil baed | 0.8 | |
| POM | -45°C to +120°C | Mineral oil baed | 0.8 | |
| PA | -45°C to +120°C | Mineral oil baed | 1.0 | |
| PTFE | -55°C to +200°C | Mineral oil baed,biological degradable oils water | 15 | 40 |
| PHENOLIC RESIN COTTON FABRIC | -50°C to +120°C | Mineral oil baed,biological degradable oils water | 1.0 |
JSPSEAL aims at win-win situation with China customer. We’re able to improve customer competitiveness with our product and service.
Why Choose JSPSEAL Seal part?
We have been selling in the aftermarket for nearly 20 years, we know more about what kind of seal the machine needs under bad work conditions. And precision molds ensure product size. Original imported raw materials ensure the mechanical properties of the products.
JSPSEAL products have been exported for more than 10 years, and our extensive export experience can help you solve various transportation problems.we can ensure fast and efficient lead times across all JSPSEAL Parts.
By lucia
from Finland
- 2017.01.28 18:53
The company keeps to the operation concept "scientific management, high quality and efficiency primacy, customer supreme", we have always maintained business cooperation. Work with you,we feel easy!
By Griselda
from Bangladesh
- 2017.11.11 11:41
